dmesg - OCZ PETROL

Return To OCZ PETROL System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-031000rc5-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201306082135 SMP Sun Jun 9 01:42:44 UTC 2013
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dfedffff] usable
BIOS-e820: [mem 0x00000000dfee0000-0x00000000dfee2fff] ACPI NVS
BIOS-e820: [mem 0x00000000dfee3000-0x00000000dfeeffff] ACPI data
BIOS-e820: [mem 0x00000000dfef0000-0x00000000dfefffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. P35-DS4/P35-DS4, BIOS F4 05/11/2007
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x120000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CDFFF write-protect
  CE000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 100000000 mask FE0000000 write-back
  1 base 000000000 mask F00000000 write-back
  2 base 0E0000000 mask FE0000000 uncachable
  3 base 0DFF00000 mask FFFF00000 write-through
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000f5610-0x000f561f] mapped at [c00f5610]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
 [mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
 [mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
 [mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01ad4000, 0x01ad4fff] PGTABLE
cma: CMA: reserved 16 MiB at 35400000
RAMDISK: [mem 0x3641c000-0x37205fff]
ACPI: RSDP 000f6fe0 00014 (v00 GBT   )
ACPI: RSDT dfee3040 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP dfee30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT dfee3180 04B36 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS dfee0000 00040
ACPI: HPET dfee7e00 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG dfee7e80 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC dfee7d00 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT dfee7f00 0015C (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
ACPI: SSDT dfee8390 00275 (v01  PmRef    CpuPm 00003000 INTL 20040311)
ACPI: Local APIC address 0xfee00000
3716MB HIGHMEM available.
891MB LOWMEM available.
  mapped low ram: 0 - 37bfe000
  low ram: 0 - 37bfe000
BRK [0x01ad5000, 0x01ad5fff] PGTABLE
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  Normal   [mem 0x01000000-0x37bfdfff]
  HighMem  [mem 0x37bfe000-0x1fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009efff]
  node   0: [mem 0x00100000-0xdfedffff]
  node   0: [mem 0x00000000-0x1fffffff]
On node 0 totalpages: 1048190
free_area_init_node: node 0, pgdat c19087c0, node_mem_map f3000020
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  Normal zone: 1752 pages used for memmap
  Normal zone: 224254 pages, LIFO batch:31
  HighMem zone: 7433 pages used for memmap
  HighMem zone: 819938 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
e820: [mem 0xdff00000-0xefffffff] available for PCI devices
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bb4000 s33088 r0 d24256 u57344
pcpu-alloc: s33088 r0 d24256 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1046406
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 9437176 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:00120000)
Memory: 4103788k/4718592k available (6200k kernel code, 88972k reserved, 3114k data, 784k init, 3279752k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
    pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
    vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
      .init : 0xc1919000 - 0xc19dd000   ( 784 kB)
      .data : 0xc160e02b - 0xc1918980   (3114 kB)
      .text : 0xc1000000 - 0xc160e02b   (6200 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f7408000 soft=f740a000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2333.322 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.64 BogoMIPS (lpj=9333288)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives: 36k freed
ACPI: Core revision 20130328
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28775 entries in 57 pages
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz (fam: 06, model: 0f, stepping: 0b)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
CPU 1 irqstacks, hard=f74ee000 soft=f74f0000
Initializing CPU#1
smpboot: Booting Node   0, Processors  #1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (9333.28 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdfee0000-0xdfee2fff] (12288 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: SSDT dfee8300 00087 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 00087 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 20: [io  0xe000-0xe01f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 20: [io  0xe100-0xe11f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 20: [io  0xe500-0xe51f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 10: [mem 0xf6205000-0xf62053ff]
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf6200000-0xf6203fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io  0xe200-0xe21f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io  0xe300-0xe31f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io  0xe400-0xe41f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xf6204000-0xf62043ff]
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0810 (mask 000b)
pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io  0xe600-0xe607]
pci 0000:00:1f.2: reg 14: [io  0xe700-0xe703]
pci 0000:00:1f.2: reg 18: [io  0xe800-0xe807]
pci 0000:00:1f.2: reg 1c: [io  0xe900-0xe903]
pci 0000:00:1f.2: reg 20: [io  0xea00-0xea1f]
pci 0000:00:1f.2: reg 24: [mem 0xf6206000-0xf62067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf6207000-0xf62070ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
pci 0000:01:00.0: [10de:0140] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xe8000000-0xebffffff]
pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xec000000-0xecffffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xefffffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0xa000-0xafff]
pci 0000:03:00.0: [197b:2363] type 00 class 0x010601
pci 0000:03:00.0: reg 24: [mem 0xf6000000-0xf6001fff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
pci 0000:03:00.1: reg 10: [io  0xb000-0xb007]
pci 0000:03:00.1: reg 14: [io  0xb100-0xb103]
pci 0000:03:00.1: reg 18: [io  0xb200-0xb207]
pci 0000:03:00.1: reg 1c: [io  0xb300-0xb303]
pci 0000:03:00.1: reg 20: [io  0xb400-0xb40f]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.4:   bridge window [mem 0xf6000000-0xf60fffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 10: [io  0xc000-0xc0ff]
pci 0000:04:00.0: reg 18: [mem 0xf5000000-0xf5000fff 64bit]
pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.5:   bridge window [mem 0xf4000000-0xf5ffffff]
pci 0000:05:01.0: [10ec:8139] type 00 class 0x020000
pci 0000:05:01.0: reg 10: [io  0xd000-0xd0ff]
pci 0000:05:01.0: reg 14: [mem 0xf6100000-0xf61000ff]
pci 0000:05:01.0: supports D1 D2
pci 0000:05:01.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xf6100000-0xf61fffff]
pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
ACPI: No dock devices found.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdfee0000-0xdfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io  0x04d0-0x04d1] has been reserved
system 00:00: [io  0x0290-0x029f] has been reserved
system 00:00: [io  0x0800-0x0805] has been reserved
system 00:00: [io  0x0290-0x0294] has been reserved
system 00:00: [io  0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [dma 3]
pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
system 00:07: [io  0x0400-0x04bf] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x000d3000-0x000d3fff] has been reserved
system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:09: [mem 0xdfee0000-0xdfefffff] could not be reserved
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x00100000-0xdfedffff] could not be reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
system 00:09: [mem 0x000e0000-0x000effff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff pref] to [bus 04] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf6300000-0xf64fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf6500000-0xf66fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xf6700000-0xf68fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xf6900000-0xf6bfffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xed000000-0xed01ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xefffffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.0:   bridge window [mem 0xf6300000-0xf64fffff]
pci 0000:00:1c.0:   bridge window [mem 0xf6500000-0xf66fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.4:   bridge window [mem 0xf6000000-0xf60fffff]
pci 0000:00:1c.4:   bridge window [mem 0xf6700000-0xf68fffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xf6900000-0xf690ffff pref]
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.5:   bridge window [mem 0xf4000000-0xf5ffffff]
pci 0000:00:1c.5:   bridge window [mem 0xf6900000-0xf6bfffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xf6100000-0xf61fffff]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 1 [mem 0xe8000000-0xefffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe7ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xf6300000-0xf64fffff]
pci_bus 0000:02: resource 2 [mem 0xf6500000-0xf66fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf60fffff]
pci_bus 0000:03: resource 2 [mem 0xf6700000-0xf68fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf5ffffff]
pci_bus 0000:04: resource 2 [mem 0xf6900000-0xf6bfffff pref]
pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xf6100000-0xf61fffff]
pci_bus 0000:05: resource 4 [io  0x0000-0xffff]
pci_bus 0000:05: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 14248k freed
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1371199465.452:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1669
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xf6205000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-031000rc5-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf6204000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-031000rc5-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.0-031000rc5-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.10.0-031000rc5-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e500
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.10.0-031000rc5-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.10.0-031000rc5-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.10.0-031000rc5-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.10.0-031000rc5-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 49be67cfae3540d774f1f614593e235699e58cc5'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:02: setting system clock to 2013-06-14 08:44:26 UTC (1371199466)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 784k freed
Write protecting the kernel text: 6204k
Write protecting the kernel read-only data: 2552k
NX-protecting the kernel data: 4036k
udevd[94]: starting version 175
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems 
ahci 0000:00:1f.2: setting latency timer to 64
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: irq 45 for MSI/MSI-X
r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0xf8438000, 00:1a:4d:4a:a2:42, XID 18000000 IRQ 45
r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
pata_jmicron 0000:03:00.1: setting latency timer to 64
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 17
ata2: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 17
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:05:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
8139too: 8139too Fast Ethernet driver 0.9.28
8139too 0000:05:01.0 eth1: RealTek RTL8139 at 0x0001d000, 00:40:f4:a7:b0:14, IRQ 19
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m2048@0xf6206000 port 0xf6206100 irq 44
ata4: SATA max UDMA/133 abar m2048@0xf6206000 port 0xf6206180 irq 44
ata5: SATA max UDMA/133 abar m2048@0xf6206000 port 0xf6206200 irq 44
ata6: SATA max UDMA/133 abar m2048@0xf6206000 port 0xf6206280 irq 44
ata7: SATA max UDMA/133 abar m2048@0xf6206000 port 0xf6206300 irq 44
ata8: SATA max UDMA/133 abar m2048@0xf6206000 port 0xf6206380 irq 44
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m8192@0xf6000000 port 0xf6000100 irq 16
ata10: SATA max UDMA/133 abar m8192@0xf6000000 port 0xf6000180 irq 16
ata1.01: ATAPI: TSSTcorpCD/DVDW SH-S182M, SB04, max UDMA/33
ata1.01: configured for UDMA/33
scsi 0:0:1:0: CD-ROM            TSSTcorp CD/DVDW SH-S182M SB04 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sr 0:0:1:0: Attached scsi generic sg0 type 5
ata3: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
usb 8-1: new low-speed USB device number 2 using uhci_hcd
tsc: Refined TSC clocksource calibration: 2333.333 MHz
Switching to clocksource tsc
ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata9.00: ATA-8: OCZ-PETROL, 3.12, max UDMA/133
ata9.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata9.00: configured for UDMA/133
usb 8-1: New USB device found, idVendor=046d, idProduct=c31d
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: USB Keyboard
usb 8-1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
ata4: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input2
hid-generic 0003:046D:C31D.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.2-1/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input3
hid-generic 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.2-1/input1
usb 8-2: new low-speed USB device number 3 using uhci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
usb 8-2: New USB device found, idVendor=09da, idProduct=000a
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: USB Mouse
usb 8-2: Manufacturer: A4Tech
input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input4
a4tech 0003:09DA:000A.0003: input,hidraw2: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.2-2/input0
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
scsi 8:0:0:0: Direct-Access     ATA      OCZ-PETROL       3.12 PQ: 0 ANSI: 5
sd 8:0:0:0: Attached scsi generic sg1 type 0
sd 8:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 8:0:0:0: [sda] Write Protect is off
sd 8:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 >
sd 8:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 4191228k swap on /dev/sda5.  Priority:-1 extents:1 across:4191228k SSFS
udevd[354]: starting version 175
lp: driver loaded but no devices found
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \GP2C 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
wmi: Mapper loaded
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[drm] Initialized drm 1.1.0 20060810
parport0: cannot get buffer for DMA, resorting to PIO operation
type=1400 audit(1371199469.881:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=568 comm="apparmor_parser"
type=1400 audit(1371199469.881:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=568 comm="apparmor_parser"
type=1400 audit(1371199469.881:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=568 comm="apparmor_parser"
lp0: using parport0 (interrupt-driven).
nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x043000a4
nouveau  [  DEVICE][0000:01:00.0] Chipset: NV43 (NV43)
nouveau  [  DEVICE][0000:01:00.0] Family : NV40
nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
nouveau  [   VBIOS][0000:01:00.0] BIT signature found
nouveau  [   VBIOS][0000:01:00.0] version 05.43.02.27.00
nouveau  [     PFB][0000:01:00.0] RAM type: GDDR3
nouveau  [     PFB][0000:01:00.0] RAM size: 128 MiB
nouveau  [     PFB][0000:01:00.0]    ZCOMP: 378880 tags
microcode: CPU0 sig=0x6fb, pf=0x1, revision=0xb3
ppdev: user-space parallel port driver
init: failsafe main process (717) killed by TERM signal
microcode: CPU1 sig=0x6fb, pf=0x1, revision=0xb3
microcode: Microcode Update Driver: v2.00 , Peter Oruba
gpio_ich: GPIO from 195 to 255 on gpio_ich
type=1400 audit(1371199470.285:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=805 comm="apparmor_parser"
type=1400 audit(1371199470.289:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=801 comm="apparmor_parser"
type=1400 audit(1371199470.297:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=802 comm="apparmor_parser"
type=1400 audit(1371199470.297:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=802 comm="apparmor_parser"
type=1400 audit(1371199470.297:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=801 comm="apparmor_parser"
type=1400 audit(1371199470.301:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=805 comm="apparmor_parser"
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
hda_intel: position_fix set to 1 for device 1458:a022
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
init: alsa-restore main process (884) terminated with status 19
r8169 0000:04:00.0 eth1: link down
r8169 0000:04:00.0 eth1: link down
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
8139too 0000:05:01.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
SKU: Nid=0x1d sku_cfg=0x4005e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   dig-out=0x1e/0x0
   inputs:
     Rear Mic=0x18
     Front Mic=0x19
     Line=0x1a
     CD=0x1c
   dig-in=0x1f
realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0885
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
nouveau  [  PTHERM][0000:01:00.0] FAN control: PWM
nouveau  [  PTHERM][0000:01:00.0] fan management: disabled
nouveau  [  PTHERM][0000:01:00.0] internal sensor: no
[TTM] Zone  kernel: Available graphics memory: 427744 kiB
[TTM] Zone highmem: Available graphics memory: 2067620 kiB
[TTM] Initializing pool allocator
mtrr: type mismatch for e0000000,8000000 old: write-back new: write-combining
nouveau  [     DRM] VRAM: 124 MiB
nouveau  [     DRM] GART: 512 MiB
nouveau  [     DRM] TMDS table version 1.1
nouveau  [     DRM] DCB version 3.0
nouveau  [     DRM] DCB outp 00: 01000300 00000028
nouveau  [     DRM] DCB outp 01: 04010312 00000000
nouveau  [     DRM] DCB outp 02: 04010310 00000028
nouveau  [     DRM] DCB outp 03: 02020321 0000c080
nouveau  [     DRM] Saving VGA fonts
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
nouveau  [     DRM] 0xD3CE: Parsing digital output script table
nouveau  [     DRM] 2 available performance level(s)
nouveau  [     DRM] 0: core 500MHz shader 500MHz memory 1000MHz voltage 1300mV fanspeed 100%
nouveau  [     DRM] 1: core 500MHz shader 500MHz memory 1000MHz voltage 1400mV fanspeed 100%
nouveau  [     DRM] c: core 501MHz shader 501MHz memory 501MHz voltage 1200mV fanspeed 100%
nouveau  [     DRM] MM: using M2MF for buffer copies
nouveau  [     DRM] Setting dpms mode 3 on TV encoder (output 3)
init: plymouth-upstart-bridge main process (760) killed by TERM signal
nouveau  [     DRM] allocated 1280x1024 fb: 0x9000, bo f6aa3a00
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
init: plymouth-splash main process (1172) terminated with status 1
r8169 0000:04:00.0 eth1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready

Return To OCZ PETROL System Information